عنوان	Numerical investigation of effects of inner cone on flow field, performance and erosion rate of cyclone separators
نوع پژوهش	مقاله چاپ‌شده در مجلات علمی
کلیدواژه‌ها	Gas Cyclone, CFD, Eulerian-Lagrangian approach, Inner cone, Erosion rate
چکیده	Abstract Gas cyclones have many industrial applications for separation of solids and liquids from gases. The geometry of the cyclone is the most influential parameter for its performance. This study investigates the effect of presence of an inner cone located at the bottom of the cyclone on the performance of the cyclone separator. Several CFD simulations in cyclones with inner cones with different diameters and heights were performed using the Reynolds stress turbulence model (RSM). The collection efficiency of the cyclone was studied using the Eulerian-Lagrangian approach. The results showed that the maximum tangential velocity is 1.6 to 1.7 times the inlet velocity. On the other hand, in the radial sections crossing the inner cone, the gradients of the axial and tangential velocities are zero. The maximum axial and tangential velocities occurred in the region between the top of the inner cone to the vortex finder. It was found that by increasing the inner cone height at constant diameter, the cyclone collection performance improves. An increase in the diameter of the inner cone, however, leads to a decrease in the cyclone performance. In overall, with an increase in the inner cone height and diameter, the pressure loss decreases. Finally, the erosion study was conducted using the Det Norske Veritas (DNV) erosion model. It was found that the value of coefficient of restitution affects the predicted erosion rate. In addition, the collection efficiency decreases when the erosion effect was included in the CFD model especially for higher velocities.
پژوهشگران	فرزاد پرواز (نفر اول)، سید حسین حسینی (نفر دوم)، خیری السید (نفر سوم)، گودرز احمدی (نفر چهارم)